Description: 

Nano sized brushed flight controller ideal for DIY multicopters with up to 6 brushed motors. Comes pre-installed with latest CleanFlight firmware, with tweaks and defaults made to utilise everything from this tiny flight controller!



Features: 

  • Baseflight & Cleanflight compatible
  • Single side populated (for super easy mounting with double side tape)
  • 3g
  • MPU6050 Accelerometer + Gyroscope
  • Baro pads (chip not populated currently)
  • Mag pads (chip not populated currently)
  • Brushed motor support up to 6 motors (all populated with Nfets)
  • 8A N Channel fets
  • Flight battery voltage monitoring
  • Spektrum Satellite (3.3v) or PPM (vbatt) rx input
  • Spektrum bind button (hold on boot to bind)
  • RSSI PWM to Analog (RC circuit) on ADC5
  • CH2, ADC5 pads available as solder pads
  • 3.3v Buck/Boost regulator (no brownouts) for super clean power
  • 1S (4.2V) only (maximum input voltage 5.5v)
  • Expansion headers (SPI, SWDIO/SWCLK, Serial0, Serial1, CH7, CH8, 3.3V, VBAT, GND)
  • WS2812B LED header (including logic level converter to power LEDs direct from VBATT)
  • Buzzer led for low battery alarm (bright LED could also be used)
  • Buzzer transistor either for physical buzzer or a simple LED
  • Connectors all around edge and on both sides with labels
  • I2C pads broken out
  • 3.3v and GND pads for auxiliary expansion

Includes: 

  • Flight controller board
  • 4pin to 6pin, FC to FTDI cable (for use with a USB serial adapter)
  • 3pin to 3pin, FC to Spek Satellite (LemonRX compatible) cable
  • 2pin to 2pin, FC to 'Walkera style' battery connector

Shopping list: 

Documentation: 

The product user manual can be found here.

Battery Pin Change Mod: 

The included battery cable works with the HobbyKing batteries, however it may not be the correct polarity for all. You can easily change the pinout by following the guide located here.

Firmware:

Latest firmware is available here (right click -> "Save Link As").

Accessories
Included Accessories 1x 2pin power cable 1x 4pin to FTDI (FTDI cable), 1x 3pin RX cable (spek sat)
Electrical Characteristics
Input Voltage 3-5v (1S LiPo)
Output Voltage 3.3v
Flight Controller Features
Board Type Brushed (6x integrated 8A N-FETs)
Compatible Firmware Baseflight, Cleanflight
Motor Outputs 6
Processor Type STM32
Sensors MPU6050 (Acc + Gyro)
Physical Attributes
Length 30mm
Width 30mm
Height 4mm
Weight 3g

Write a review

Note: HTML is not translated!
    Bad           Good

multiFlite NANO-B-FC Flight Controller v1.1

  • Brand: multiFlite
  • Product Code: nBFCv1.1
  • Availability: Out Of Stock
  • £42.99


Available Options


Related Products

multiFlite NANO-B-BT Bluetooth Expansion v1.0

multiFlite NANO-B-BT Bluetooth Expansion v1.0

Description: Bluetooth 4.0 expansion board for our multiFlite nano-B-FC!This expansion board gi..

£17.99

multiFlite NANO-B-58TX 20mw Video Transmitter Expansion v1.1G

multiFlite NANO-B-58TX 20mw Video Transmitter Expansion v1.1G

Description: 40ch 5.8GHz 20mw video transmitter expansion for NANO-B-FC. sow lighter than befor..

£25.99

USB Serial Adapter

USB Serial Adapter

Description: Super simple USB TTL (FTDI) Adatpter! Provides USB-Serial communication, perfect f..

£3.49

5 Pin LED/BUZZER Cable

5 Pin LED/BUZZER Cable

Description: A 5 pin 1.25mm pitch connector and 15cm cable used on the multiFlite NANO-B-FC to ..

£0.99

2 Pin Male Walkera Battery Cable

2 Pin Male Walkera Battery Cable

Description: A 2 pin 2mm pitch male connector and 10cm cable commonly referred to as a Walkera ..

£0.99

Micro Carbon Fiber Brushed Hex Frame

Micro Carbon Fiber Brushed Hex Frame

Description: Micro carbon fiber hex frame designed for brushed motors and perfectly suited for ..

£32.99

Micro Carbon Fiber Brushed Quad Frame

Micro Carbon Fiber Brushed Quad Frame

Description: Premium carbon fiber quad frame that's built to be both light and tough. This fram..

£24.99

2 Pin Female JST-PH Cable

2 Pin Female JST-PH Cable

Description: A 2 pin 2mm pitch female connector and 10cm cable called a JST-PH connector, use t..

£0.99

multiFlite Coreless Brushed Motor CL-0820 (4x pack)

multiFlite Coreless Brushed Motor CL-0820 (4x pack)

Description: Set of four high powered Chaoli brushed coreless motors, capable of generating 39g..

£11.99

2 Pin Walkera Power Cable Adapter

2 Pin Walkera Power Cable Adapter

Description: A 2 pin 2mm pitch male connector at one end, and at the other the commonly referre..

£0.99

3 Pin RX Cable Adapter

3 Pin RX Cable Adapter

Description: A 3 pin 1.25mm pitch male connector to a 1.50mm pitch male connector (used on Lemo..

£0.99

4 Pin USB Serial Adapter Cable

4 Pin USB Serial Adapter Cable

Description: A 4 pin 1.25mm pitch male connector to a 2.54mm pitch male connector (USB to Seria..

£0.99

4 Pin 1.25mm Female Cable

4 Pin 1.25mm Female Cable

Description: A 4 pin 1.25mm pitch female connector.Cable is a fairly stiff (not silicone coated..

£0.59

2 Pin JST Power Cable Adapter

2 Pin JST Power Cable Adapter

Description: A 2 pin 2mm pitch male connector at one end, and at the other a JST connector typi..

£0.99

multiFlite PICO Buzzer Kit

multiFlite PICO Buzzer Kit

Description: An active buzzer perfect for the PICO-B-FC. This buzzer is small and loud, perfect..

£2.99

Tags: Brushed, Flight Controller